ISP Pro Audio

XMAX 415™

The ISP Technologies XMAX 415™ Subwoofer has been carefully designed to provide a superior level of performance, both in terms of SPL output and low frequency extension. The four 15-inch drivers are of the latest state-of-the-art neo design, providing both lightweight and excellent performance. The result is an outstanding 2800W RMS power handling for low power compression and high reliability.

The XMAX 415 Cabinet also features an extended tuned port, much larger than found on other cabinets. This provides better linearity for higher output and lower frequencies. Combine all this with a low cabinet tuning, and deep, tight, high output bass is achieved.

2000W RMS (3000W peak) amplifier, with four 15-inch state-of-the-art neo design drivers.

Connecting the XMAX 415 to any system is easy. It accepts a stereo or mono line-level signal with dual female XLR input jacks. Male XLR thru jacks are also provided for daisy chaining the signal to additional XMAX 415 cabinets in a larger system. The built-in Linquitz-Riley 24dB per octave crossover feeds the high-pass output XLR jacks, which can be used to feed the inputs of a full-range top box.

Standard with the system is a dual channel, 2000W RMS (3000W peak) amplifier that is specifically designed for use with the internal speakers. This amplifier features ISP’s patented D-CAT™ high-current amplification technology. The amplifier in the XMAX 415 is designed to avoid operating beyond the subwoofers capability. Dual cooling fans automatically switch on when needed.

The dimensions allow for enhanced truck pack with 94-inch (7’8″) internal truck widths. In the available Touring Version, handles and rear casters are integrated into the cabinet design for easy moving and setup.

Made with Baltic Birch

Configuration: Quad 15 ported active subwoofer
LF Drivers: 4 x 15 inch, large excursion, 2800W (total) AES rating
Sensitivity: 103dB at 1W at 1 meter
SPL: 135dB at 1 meter, long term, 137dB at 1 meter peak
Freq. Range: 33Hz to 110Hz (-10dB), with internal crossover
Freq. Response: 40Hz to 80Hz (+ – 3dB @ 1W), with internal crossover
Amp Power: 1600W RMS, 2500W peak, high current DCAT, fan cooled
Crossover Freq.: 90Hz internal fourth order LR low and high pass. Low pass can be bypassed for use with external processor
Power Required: 10 amps x 120 VAC maximum
Construction: Baltic Birch plywood, extensively braced
Finish: Rubberized Polyurethane
Dimensions: 29-3/4″ W x 45-7/8″ H x 31-1/4″ D
Weight: 200lbs.

System Capabilities